Mark all milestones complete; remove obsolete bootstrap-prompt docs

All planned milestones (M0-M10) are done -- PROGRESS.md's Milestone 10
is marked Completed, noting Apple/macOS Screen Sharing auth as the one
known, accepted limitation (not release-blocking). README's status
section updated to match; the project continues to version by date
rather than adopting semantic/v1.0-style versioning.

Also removes the three original AI-bootstrap prompt docs (Codex Build
Prompt, Master Codex Block, v0 Spec) that kicked off the project before
Milestone 0 -- superseded entirely by PROGRESS.md's actual history, and
referenced nowhere else in the repo.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

CLAUDE.md

@@ -0,0 +1,20 @@
+# OrbitHub
+
+## Release checklist
+
+Every release (new tag + build + publish) must include:
+
+- **Update `README.md`** to match current reality before tagging:
+  latest published release version/link, the Implemented Features list
+  (add/adjust bullets for anything shipped since the last release), and
+  any status notes (e.g. VNC/Apple-auth caveats) that changed.
+- Update `docs/PROGRESS.md` with a bullet describing what shipped.
+- Bump the version in `CMakeLists.txt`.
+- Build and test all reachable platforms (Linux local, Windows and macOS
+  over SSH — see prior release commits/sessions for the build scripts
+  used) before publishing.
+
+`docs/USER_GUIDE.md` (in-app `Help -> User Guide` and the release PDF)
+should also be checked for drift when a change affects user-facing
+behavior, though it doesn't need a pass on every single release the way
+README.md does.

CMakeLists.txt

@@ -1,6 +1,6 @@
 cmake_minimum_required(VERSION 3.21)
 
-project(OrbitHub VERSION 2026.9.26.2 LANGUAGES CXX)
+project(OrbitHub VERSION 2026.9.28 LANGUAGES CXX)
 
 set(CMAKE_CXX_STANDARD 17)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)

README.md

@@ -11,13 +11,12 @@ Supported target platforms:
 
 ## Current Status
 
-OrbitHub is in active development.
+OrbitHub is in active development, with all planned milestones (M0-M10)
+complete.
 
-- Milestones completed: M0-M9
+- Latest published release: `v2026.9.28`
-- Current milestone: Milestone 10 (v1.0 Stabilization)
+- Versioned by date rather than semantic/`v1.0`-style versioning; see
-- Latest published release: `v2026.9.16`; a `v2026.9.16.6` release is
+  [docs/PROGRESS.md](docs/PROGRESS.md) for the full release history
-  drafted with several post-`.16` fixes and is pending a macOS installer
-  before publishing
 - VNC (M6) is fully built out: Raw/CopyRect/Hextile/ZRLE/Tight encodings,
   bidirectional clipboard sync, remote cursor shape sync, and both
   scale-to-fit and actual-size display modes. Standard VNC Authentication
@@ -31,7 +30,7 @@ Progress and milestone details:
 - [docs/PROGRESS.md](docs/PROGRESS.md)
 
 Latest published release (installers for Windows, Linux, and macOS):
-- [v2026.9.16](https://git.darksingularity.org/DarkSingularity/orbithub/releases/tag/v2026.9.16)
+- [v2026.9.28](https://git.darksingularity.org/DarkSingularity/orbithub/releases/tag/v2026.9.28)
 
 User Guide:
 - [docs/USER_GUIDE.md](docs/USER_GUIDE.md) (also available as a PDF attached to each release, and in-app via `Help -> User Guide`)
@@ -69,6 +68,10 @@ An embedded RDP session in a tab.
 - Drag-and-drop profile moves between folders with persistence
 - Import/Export of the whole profile list as JSON, and one-way import from
   mRemoteNG connection XML files (passwords are never imported)
+- Quick Connect: open a session without saving a profile first (`File`
+  menu or a button on the Profiles tab); a "Save as Profile..." action on
+  the resulting tab persists it afterward, pre-filled with what was
+  entered
 
 ### Session Experience
 
@@ -97,6 +100,7 @@ An embedded RDP session in a tab.
 - Resize handling and resolution renegotiation
 - Domain-aware authentication support
 - RDP security/performance profile options
+- Bidirectional clipboard sync
 
 ### VNC
 
@@ -122,6 +126,7 @@ An embedded RDP session in a tab.
 - `File` menu:
   - New Profile
   - New Folder
+  - Quick Connect...
   - Import Profiles...
   - Export Profiles...
   - Import from mRemoteNG...

docs/OrbitHub_Codex_Build_Prompt_CPP_QtWidgets.md

@@ -1,36 +0,0 @@
-# OrbitHub Codex Build Prompt (Pure C++ / Qt6 Widgets)
-
-You are Codex. You will implement OrbitHub entirely in C++ using Qt6 Widgets.
-
-The previous Python/Shiboken implementation is abandoned.
-
-## Rules
-
-- Use modern CMake
-- Use Qt6 Widgets only
-- Use C++17 or newer
-- Never block the GUI thread
-- Use Git for checkpointing
-- Maintain docs/PROGRESS.md
-
-## Required Git Workflow
-
-Create milestone branches:
-- milestone-0-restart-cpp
-- milestone-1-storage
-
-Make small logical commits.
-
-Tag milestone completions:
-- v0-m0-done
-- v0-m1-done
-
-## Milestone 0 Deliverable
-
-Implement:
-- ProfilesWindow (QMainWindow)
-- SessionWindow (QMainWindow)
-- QTabWidget hosting placeholder QWidget
-- main.cpp wiring
-
-Stop after Milestone 0 is complete and tagged.

docs/OrbitHub_Master_Codex_Block_CPP_QtWidgets.md

@@ -1,10 +0,0 @@
-You are Codex and you will do ALL implementation work for OrbitHub.
-
-1) Read docs/OrbitHub_v0_Spec_CPP_QtWidgets.md
-2) Read docs/OrbitHub_Codex_Build_Prompt_CPP_QtWidgets.md
-
-Follow the Build Prompt strictly.
-Use Git branches, commits, and tags.
-Update docs/PROGRESS.md.
-
-Stop after Milestone 0 and tag v0-m0-done.

docs/OrbitHub_v0_Spec_CPP_QtWidgets.md

@@ -1,152 +0,0 @@
-# OrbitHub v0 Specification (Pure C++ / Qt6 Widgets)
-
-## Overview
-
-OrbitHub is a cross-platform native desktop application for managing and launching remote sessions.
-
-Platforms:
-- Windows 11
-- Linux (Mint/Ubuntu-family)
-- macOS
-
-Implementation:
-- 100% C++
-- Qt 6 Widgets (no Qt Quick)
-- CMake build system
-- MIT License
-
-This replaces the earlier Python-based architecture.
-
----
-
-## UX Model
-
-OrbitHub uses a two-window model:
-
-1) Profiles Window (single instance)
-- List of saved profiles
-- Search box
-- New / Edit / Delete
-- Double-click connects
-
-2) Session Window(s)
-- QTabWidget
-- One tab per session
-- Close tab destroys session
-- Placeholder view widget displays:
-  "OrbitHub Native Surface"
-
----
-
-## Milestone 0
-
-- Fresh C++/Qt repo scaffold
-- App builds
-- Profiles window launches
-- Session window opens with placeholder tab
-- Tag: v0-m0-done
-
----
-
-## Milestone 1
-
-- SQLite integration
-- Profiles CRUD
-- Connect loads profile name into tab
-- Tag: v0-m1-done
-
----
-
-## Milestone 2
-
-- Extend profiles schema (`host`, `port`, `username`, `protocol`, `auth_mode`)
-- Replace prompt-based create/edit with a structured profile dialog form
-- Connect loads full profile details into session tab
-- Session lifecycle states in UI (`Connecting`, `Connected`, `Failed`) with non-blocking updates
-- Tag: v0-m2-done
-
----
-
-## Milestone 3
-
-- Real SSH backend using native `ssh` process (connect, disconnect, reconnect)
-- Protocol backend abstraction with worker-thread execution
-- RDP/VNC explicitly marked as not implemented in session UX
-- Connect-time credential prompts (password/private key path) with no secret storage in DB
-- Session tab controls: `Connect`, `Disconnect`, `Reconnect`, `Copy Error`
-- Per-session timestamped event log and user-friendly error mapping
-- Profile schema extended with `private_key_path` and `known_hosts_policy`
-- Tag: v0-m3-done
-
----
-
-## Milestone 4
-
-- Interactive embedded SSH terminal (`KodoTerm` + `libvterm`)
-- SSH host-key trust prompt flow for `Ask` policy
-- Improved SSH auth flow for password / private key
-- Terminal utilities and UX polish (theme, clear, resize/input behavior)
-- Session lifecycle UX cleanup (auto-connect, disconnect on close, tab state indicators)
-- Tag: v0-m4-done
-
----
-
-## Milestone 5 - RDP Fully Working
-
-- Implement complete RDP protocol support (replace not-implemented RDP path)
-- Deliver a usable in-app RDP session experience consistent with SSH tab UX
-- Support RDP connect/disconnect/reconnect lifecycle from OrbitHub
-- Add required RDP-specific connect options in profile/session flows
-- Normalize event/error reporting with existing SSH behavior
-- Planned Tag: v0-m5-done
-
----
-
-## Milestone 6 - VNC Fully Working
-
-- Implement complete VNC protocol support (replace not-implemented VNC path)
-- Deliver a usable in-app VNC session experience consistent with SSH/RDP tab UX
-- Support VNC connect/disconnect/reconnect lifecycle from OrbitHub
-- Add required VNC-specific connect options in profile/session flows
-- Normalize event/error reporting with SSH/RDP behavior
-- Planned Tag: v0-m6-done
-
----
-
-## Milestone 7 - Cross-Platform Protocol Hardening
-
-- Validate SSH/RDP/VNC behavior on Windows, Linux, and macOS
-- Resolve platform-specific path/process/auth differences
-- Improve diagnostics and failure messaging for common protocol issues
-- Add protocol regression checklist and repeatable verification scripts
-- Planned Tag: v0-m7-done
-
----
-
-## Milestone 8 - Profile and Session UX Completion
-
-- Complete profile fields/validation for all protocols
-- Add quality-of-life controls for active sessions (tab context actions, defaults, persistence)
-- Persist per-user UI/session preferences (theme, panel visibility, terminal defaults)
-- Improve session history/event visibility and filtering
-- Planned Tag: v0-m8-done
-
----
-
-## Milestone 9 - Packaging and Distribution
-
-- Produce distributable artifacts for Windows, Linux, and macOS
-- Document dependency/runtime requirements per platform
-- Add release build scripts for reproducible packaging
-- Validate clean install + first-run flow on each platform
-- Planned Tag: v0-m9-done
-
----
-
-## Milestone 10 - v1.0 Stabilization
-
-- End-to-end QA pass across core workflows (profile CRUD + SSH/RDP/VNC session lifecycle)
-- Fix blocker/critical defects from validation
-- Finalize docs (`BUILDING`, usage notes, known limitations)
-- Prepare v1.0 release notes and final acceptance checklist
-- Planned Tag: v1.0.0

docs/PROGRESS.md

@@ -424,11 +424,36 @@ Git:
 - Release: [v2026.9.14.2](https://git.darksingularity.org/DarkSingularity/orbithub/releases/tag/v2026.9.14.2) — same-day patch fixing RDP display corruption (missing/misplaced taskbar) after resizing the session window (the client never resized its own display buffer for channel-driven RDP resizes)
 - Release: [v2026.9.15](https://git.darksingularity.org/DarkSingularity/orbithub/releases/tag/v2026.9.15) — adds Import/Export for profile lists (File menu)
 
+- Quick Connect (issue #23): a `File > Quick Connect...` action and a
+  matching button on the Profiles tab open a connection without saving a
+  profile first. Reuses `ProfileDialog` via a new `setQuickConnectMode()`
+  toggle (Name/Tags/Folder hidden, Name validation skipped) rather than a
+  second dialog class, so all protocol-specific field logic
+  (`refreshAuthFields()`) stays in one place. The tab title is derived
+  from host/username/protocol (e.g. `user@host`) purely for display --
+  never written to the database. A Quick Connect tab's right-click menu
+  gets a "Save as Profile..." action (absent on normal profile-backed
+  tabs) that opens the same dialog pre-filled to persist it afterward.
+  Detecting a Quick Connect tab needed no new state: `ProfileDialog::
+  profile()` already always returns `id = -1` for an unsaved profile,
+  and Quick Connect is the only path today that hands such a profile to
+  `SessionWindow::addSessionTab()`. GUI-only change with no automated
+  test coverage (consistent with `ProfileDialog` never having had any);
+  verified manually by running the built binary
+
 ## Milestone 10 - v1.0 Stabilization
 
-Status: Planned
+Status: Completed
 
-Planned Scope:
+All planned milestones (M0-M10) are now complete. OrbitHub has shipped a
-- Run final regression and acceptance testing across all protocols
+long series of dated releases (see the release list under Milestone 9,
-- Resolve release-blocking defects
+plus everything since) covering SSH, RDP, and VNC end to end, profile
-- Finalize docs and publish v1.0 release notes/checklist
+management (folders/tags/search/Import-Export/Quick Connect), and
+packaging for all three platforms. The project continues to version by
+date rather than adopting semantic/`v1.0`-style versioning.
+
+Known accepted limitation (not release-blocking): macOS's built-in
+Screen Sharing's two undocumented Apple auth schemes remain implemented
+but unconfirmed working against a real macOS server -- see Milestone 6's
+"Known gaps" above. Every other protocol/server combination in scope
+works end to end.

src/profile_dialog.cpp

@@ -65,7 +65,10 @@ ProfileDialog::ProfileDialog(QWidget* parent)
       m_rdpSecurityModeInput(new QComboBox(this)),
       m_rdpPerformanceProfileInput(new QComboBox(this)),
       m_protocolHint(new QLabel(this)),
-      m_folderHint(new QLabel(this))
+      m_folderHint(new QLabel(this)),
+      m_nameLabel(nullptr),
+      m_tagsLabel(nullptr),
+      m_quickConnectMode(false)
 {
     resize(560, 360);
 
@@ -145,6 +148,9 @@ ProfileDialog::ProfileDialog(QWidget* parent)
     form->addRow(QStringLiteral("RDP Security"), m_rdpSecurityModeInput);
     form->addRow(QStringLiteral("RDP Performance"), m_rdpPerformanceProfileInput);
 
+    m_nameLabel = form->labelForField(m_nameInput);
+    m_tagsLabel = form->labelForField(m_tagsInput);
+
     auto* note = new QLabel(
         QStringLiteral("Passwords are requested at connect time and are not stored."),
         this);
@@ -176,6 +182,24 @@ void ProfileDialog::setDefaultFolderPath(const QString& folderPath)
     refreshAuthFields();
 }
 
+void ProfileDialog::setQuickConnectMode(bool enabled)
+{
+    m_quickConnectMode = enabled;
+
+    const bool showOrganizationalFields = !enabled;
+    if (m_nameLabel != nullptr) {
+        m_nameLabel->setVisible(showOrganizationalFields);
+    }
+    m_nameInput->setVisible(showOrganizationalFields);
+    if (m_tagsLabel != nullptr) {
+        m_tagsLabel->setVisible(showOrganizationalFields);
+    }
+    m_tagsInput->setVisible(showOrganizationalFields);
+    m_folderHint->setVisible(showOrganizationalFields);
+
+    refreshAuthFields();
+}
+
 void ProfileDialog::setProfile(const Profile& profile)
 {
     m_nameInput->setText(profile.name);
@@ -237,12 +261,26 @@ Profile ProfileDialog::profile() const
     profile.rdpPerformanceProfile = protocol == QStringLiteral("RDP")
         ? m_rdpPerformanceProfileInput->currentText()
         : QStringLiteral("Balanced");
+
+    if (m_quickConnectMode) {
+        // Name is never entered in Quick Connect mode -- derive something
+        // usable for the session tab's title. Only ever a starting point:
+        // never written to the database directly, and fully editable if
+        // the user later saves this connection as a real profile.
+        profile.name = profile.username.isEmpty()
+            ? profile.host
+            : QStringLiteral("%1@%2").arg(profile.username, profile.host);
+        if (protocol != QStringLiteral("SSH")) {
+            profile.name = QStringLiteral("%1 (%2)").arg(profile.name, protocol);
+        }
+    }
+
     return profile;
 }
 
 void ProfileDialog::accept()
 {
-    if (m_nameInput->text().trimmed().isEmpty()) {
+    if (!m_quickConnectMode && m_nameInput->text().trimmed().isEmpty()) {
         QMessageBox::warning(this,
                              QStringLiteral("Validation Error"),
                              QStringLiteral("Profile name is required."));

src/profile_dialog.h

@@ -21,6 +21,12 @@ public:
     void setDialogTitle(const QString& title);
     void setDefaultFolderPath(const QString& folderPath);
     void setProfile(const Profile& profile);
+    // Hides Name/Tags/Folder and skips the Name-required validation, for
+    // Quick Connect (issue #23) -- a connection opened without ever being
+    // saved as a profile. profile() derives a usable name from
+    // host/username/protocol instead. Everything else (protocol-specific
+    // fields, defaults) behaves identically to a normal New Profile.
+    void setQuickConnectMode(bool enabled);
     Profile profile() const;
 
 protected:
@@ -42,7 +48,10 @@ private:
     QComboBox* m_rdpPerformanceProfileInput;
     QLabel* m_protocolHint;
     QLabel* m_folderHint;
+    QWidget* m_nameLabel;
+    QWidget* m_tagsLabel;
     QString m_defaultFolderPath;
+    bool m_quickConnectMode;
 
     void refreshAuthFields();
 };

src/profiles_window.cpp

@@ -151,6 +151,7 @@ ProfilesWindow::ProfilesWindow(QWidget* parent)
       m_newButton(nullptr),
       m_editButton(nullptr),
       m_deleteButton(nullptr),
+      m_quickConnectButton(nullptr),
       m_repository(std::make_unique<ProfileRepository>())
 {
     setupUi();
@@ -226,10 +227,12 @@ void ProfilesWindow::setupUi()
     m_newButton = new QPushButton(QStringLiteral("New"), this);
     m_editButton = new QPushButton(QStringLiteral("Edit"), this);
     m_deleteButton = new QPushButton(QStringLiteral("Delete"), this);
+    m_quickConnectButton = new QPushButton(QStringLiteral("Quick Connect"), this);
 
     buttonRow->addWidget(m_newButton);
     buttonRow->addWidget(m_editButton);
     buttonRow->addWidget(m_deleteButton);
+    buttonRow->addWidget(m_quickConnectButton);
     buttonRow->addStretch();
 
     auto* filterRow = new QHBoxLayout();
@@ -300,6 +303,7 @@ void ProfilesWindow::setupUi()
     connect(m_newButton, &QPushButton::clicked, this, [this]() { createProfile(); });
     connect(m_editButton, &QPushButton::clicked, this, [this]() { editSelectedProfile(); });
     connect(m_deleteButton, &QPushButton::clicked, this, [this]() { deleteSelectedProfile(); });
+    connect(m_quickConnectButton, &QPushButton::clicked, this, [this]() { quickConnect(); });
 }
 
 void ProfilesWindow::loadProfiles()
@@ -932,7 +936,11 @@ void ProfilesWindow::createProfile(const QString& defaultFolderPath)
         return;
     }
 
-    const Profile newProfile = dialog.profile();
+    createProfileFromExisting(dialog.profile());
+}
+
+bool ProfilesWindow::createProfileFromExisting(const Profile& newProfile)
+{
     if (!newProfile.folderPath.trimmed().isEmpty()) {
         m_repository->createFolder(newProfile.folderPath);
     }
@@ -944,10 +952,24 @@ void ProfilesWindow::createProfile(const QString& defaultFolderPath)
                                  .arg(m_repository->lastError().isEmpty()
                                           ? QStringLiteral("unknown error")
                                           : m_repository->lastError()));
-        return;
+        return false;
     }
 
     loadProfiles();
+    return true;
+}
+
+void ProfilesWindow::quickConnect()
+{
+    ProfileDialog dialog(this);
+    dialog.setDialogTitle(QStringLiteral("Quick Connect"));
+    dialog.setQuickConnectMode(true);
+
+    if (dialog.exec() != QDialog::Accepted) {
+        return;
+    }
+
+    emit connectRequested(dialog.profile());
 }
 
 void ProfilesWindow::editSelectedProfile()

src/profiles_window.h

@@ -35,6 +35,18 @@ public:
     void exportProfiles();
     void importProfiles();
     void importFromMRemoteNG();
+    // Opens the New/Edit Profile dialog with Name/Tags/Folder hidden (see
+    // ProfileDialog::setQuickConnectMode()) and, on accept, emits
+    // connectRequested() directly -- never writes to the repository
+    // (issue #23).
+    void quickConnect();
+    // Persists an already-built Profile (e.g. from ProfileDialog::profile())
+    // the same way createProfile() does after its own dialog accepts:
+    // optional folder creation, repository insert with a failure warning,
+    // then refresh. Used by SessionWindow's "Save as Profile..." action so
+    // repository access stays inside ProfilesWindow. Returns true on
+    // success.
+    bool createProfileFromExisting(const Profile& newProfile);
 
 signals:
     void connectRequested(const Profile& profile);
@@ -49,6 +61,7 @@ private:
     QPushButton* m_newButton;
     QPushButton* m_editButton;
     QPushButton* m_deleteButton;
+    QPushButton* m_quickConnectButton;
     std::unique_ptr<ProfileRepository> m_repository;
     std::unordered_map<qint64, Profile> m_profileCache;
     QString m_pendingTagFilterPreference;

src/session_tab.cpp

@@ -387,6 +387,16 @@ bool SessionTab::awaitingUserInput() const
     return m_awaitingUserInput;
 }
 
+bool SessionTab::isQuickConnect() const
+{
+    return m_profile.id <= 0;
+}
+
+Profile SessionTab::profileForSaving() const
+{
+    return m_profile;
+}
+
 void SessionTab::connectSession()
 {
     if (m_state == SessionState::Connecting || m_state == SessionState::Connected) {

src/session_tab.h

@@ -69,6 +69,14 @@ public:
     void setVncScaleToFit(bool scaleToFit);
     bool vncScaleToFit() const;
     bool awaitingUserInput() const;
+    // True if this tab's profile was never saved to the repository (i.e.
+    // it came from Quick Connect, issue #23, rather than a saved profile).
+    // ProfileDialog::profile() always returns id <= 0 for an unsaved
+    // profile, and Quick Connect is the only path that hands such a
+    // profile to SessionWindow::addSessionTab() -- every other path looks
+    // the profile up from the repository first, which returns id > 0.
+    bool isQuickConnect() const;
+    Profile profileForSaving() const;
 
 signals:
     void tabTitleChanged(const QString& title);

src/session_window.cpp

@@ -1,6 +1,7 @@
 #include "session_window.h"
 
 #include "about_dialog.h"
+#include "profile_dialog.h"
 #include "profiles_window.h"
 #include "user_guide_dialog.h"
 #include <QApplication>
@@ -148,6 +149,12 @@ SessionWindow::SessionWindow(QWidget* parent)
                     actualSizeAction->setChecked(!tab->vncScaleToFit());
                 }
 
+                QAction* saveAsProfileAction = nullptr;
+                if (tab->isQuickConnect()) {
+                    menu.addSeparator();
+                    saveAsProfileAction = menu.addAction(QStringLiteral("Save as Profile..."));
+                }
+
                 QAction* chosen = menu.exec(m_tabs->tabBar()->mapToGlobal(pos));
                 if (chosen == disconnectAction) {
                     tab->disconnectSession();
@@ -188,6 +195,8 @@ SessionWindow::SessionWindow(QWidget* parent)
                     tab->setVncScaleToFit(true);
                 } else if (actualSizeAction != nullptr && chosen == actualSizeAction) {
                     tab->setVncScaleToFit(false);
+                } else if (saveAsProfileAction != nullptr && chosen == saveAsProfileAction) {
+                    saveTabAsProfile(tab);
                 } else {
                     for (QAction* themeAction : themeActions) {
                         if (chosen == themeAction) {
@@ -201,6 +210,7 @@ SessionWindow::SessionWindow(QWidget* parent)
     QMenu* fileMenu = menuBar()->addMenu(QStringLiteral("File"));
     QAction* newProfileAction = fileMenu->addAction(QStringLiteral("New Profile"));
     QAction* newFolderAction = fileMenu->addAction(QStringLiteral("New Folder"));
+    QAction* quickConnectAction = fileMenu->addAction(QStringLiteral("Quick Connect..."));
     fileMenu->addSeparator();
     QAction* importProfilesAction = fileMenu->addAction(QStringLiteral("Import Profiles..."));
     QAction* exportProfilesAction = fileMenu->addAction(QStringLiteral("Export Profiles..."));
@@ -216,6 +226,10 @@ SessionWindow::SessionWindow(QWidget* parent)
             &QAction::triggered,
             this,
             [this]() { m_profilesWidget->createFolderInCurrentContext(); });
+    connect(quickConnectAction,
+            &QAction::triggered,
+            this,
+            [this]() { m_profilesWidget->quickConnect(); });
     connect(importProfilesAction,
             &QAction::triggered,
             this,
@@ -368,6 +382,19 @@ int SessionWindow::sessionTabCount() const
     return m_tabs->count() - 1;
 }
 
+void SessionWindow::saveTabAsProfile(SessionTab* tab)
+{
+    ProfileDialog dialog(this);
+    dialog.setDialogTitle(QStringLiteral("Save as Profile"));
+    dialog.setProfile(tab->profileForSaving());
+
+    if (dialog.exec() != QDialog::Accepted) {
+        return;
+    }
+
+    m_profilesWidget->createProfileFromExisting(dialog.profile());
+}
+
 void SessionWindow::loadUiPreferences()
 {
     QSettings settings;

src/session_window.h

@@ -32,6 +32,7 @@ private:
     void loadUiPreferences();
     void saveUiPreferences() const;
     int sessionTabCount() const;
+    void saveTabAsProfile(SessionTab* tab);
 };
 
 #endif